General
- PoE+ 1000BASE-T Ethernet midspan power injector box, for DIN rail mount or wall mount
- PSE power sourcing equipment configuration
- Dual pair M12-X Gigabit Ethernet connectors (2 x In, 2 x Out)
- 802.3at PoE+ Type 2 Class 1-4 (up to 30W/port)
- Intended for industrial use
- Dimensions: 30mm (W) x 140mm (H) x 70mm (D) w/o DIN rail brackets
- Metal case, DIN rail bracket or wall mount plate
- M12-A 5-pin power connector
- Option terminal block power connector
- Option desktop power adapter connector
- Nominal 48V/54VDC power input operation
Front Panel I/O
- Two groups of dual M12-X circular receptacles, shielded, Cat 5, input/output
- 1000BASE-T magnetics 1:1, PoE+
- 1000BASE-T, 100BASE-TX, 10BASE-T compliant data transfer rate
- NBASE-T, 2.5GBASE-T, 5GBASE-T, 10GBASE-T on request
- M12-A 5-pin front power connector
- Option Terminal Block power input 3.5mm pitch 4-position screw lock (bottom of box)
Power Requirements
- DC Input, 44V-57V (48VDC, 54VDC)
- Power consumption 65W max. (@60W external load)
- Fast acting chip fuse (PCB soldered type – no replacement on-site)
- Protected against reverse polarity
- ESD protection (TVS)
- Common mode input filter
- M12-A 5-pin male power connector
- Option 4-Position terminal block 3.50mm pitch screw locked for power input
- Option rear power connector (desktop supply 4-pos. circular connector)
Power over Ethernet
- PSE PoE+ according to IEEE 802.3at-2009, Type 2 Class 1-4
- Maximum power delivered per port 30W (25.4W at powered device PD per specification)
- Maximum power delivered in total 60W
- IEEE 802.3at Type 2 Mode A (power over M12-X pins 1/2 & 3/4, 600mA)
- Option IEEE 802.3at Type 2 Mode B (M12-X pins 5/6 & 7/8)
- TPS23861 PSE controller, automatic mode
- Auto detect & classification, auto turn-on & disconnect
Applications
- Industrial networks – IIoT
- Rugged environments
- Edge computing
- Transportation
- Railway
Environmental & Regulatory
- Designed & manufactured in Germany
- Certified quality management according to ISO 9001
- Long term availability
- Rugged solution
- RoHS compliant
- Operating temperature -40°C to +85°C (industrial temperature range)
- Storage temperature -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% … 95% RH non condensing
- Altitude -300m … +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- EC Regulatory EN55035, EN55032, EN62368-1 (CE)
- International Protection EN60529 IP20
- MTBF tbd years
